Standby Generator Basics
Air-Cooled vs. Liquid-Cooled Standby Generators
Compare air-cooled and liquid-cooled standby systems by the loads they must serve, installation demands, maintenance, and model-specific operating data.
Read articleBrite Generators Articles
Generator Knowledge Center
Clear, source-backed guidance for choosing, installing, using, maintaining, and troubleshooting backup power.
Standby Generator Basics
Essential-Circuit vs. Whole-Home Generator Backup
Compare selected-circuit backup with whole-home transfer and learn why connected coverage and simultaneous appliance capacity are different decisions.
Read article
Installation & Transfer Switches
Home Standby Generator Installation: The Complete Process
Know what should happen between the site visit and the outage test—and what a complete installation proposal should include.
Read article
Installation & Transfer Switches
How a Generator Works With an Automatic Transfer Switch
Follow the outage sequence from utility failure to generator power, and understand the pause, load delays, and return to normal service.
Read article
Standby Generator Basics
How an Automatic Standby Generator Works
Follow the automatic standby sequence from a utility failure through engine startup, power transfer, utility restoration, and cooldown.
Read article
Generator Sizing & Load Planning
Running Watts vs. Starting Watts for Generator Sizing
Learn how running demand differs from startup demand, how to avoid counting a motor twice, and where a simple wattage worksheet stops being enough.
Read article
Installation & Transfer Switches
Standby Generator Placement and Clearance Guide
Understand the difference between wall clearance, distance from openings, overhead space, and the room technicians need to service the generator.
Read article
Standby Generator Basics
The Complete Guide to Home Standby Generators
Understand what a home standby generator does, which parts make up the system, and what to decide before requesting an installation quote.
Read article
Generator Sizing & Load Planning
The Complete Guide to Sizing a Home Standby Generator
Size a home standby generator around the equipment you need, the loads that can overlap, motor starts, and the output available on your fuel.
Read article
Generator Sizing & Load Planning
Why Home Square Footage Cannot Size a Generator by Itself
Two homes with the same floor area can need different backup systems. Compare heating, pumps, appliances, and outage expectations before choosing a generator.
Read article
Installation & Transfer Switches
100-Amp vs. 200-Amp Generator Transfer Switches
Separate the transfer switch’s current rating from generator output, then compare whole-service and selected-load arrangements.
Read article
Standby Generator Basics
10kW vs. 14kW Generac Standby Generators
Compare 10 kW and 14 kW Generac options using your actual outage loads, motor starts, fuel, and the complete installed package.
Read article
Standby Generator Basics
18kW vs. 22kW Generac Standby Generators
Compare 18 kW and 22 kW Generac systems using fuel-specific output and the appliance combinations you expect during an outage.
Read article
Standby Generator Basics
24kW vs. 26kW vs. 28kW Generac Generators
Compare 24, 26, and 28 kW Generac models on your fuel, then evaluate whether extra capacity changes HVAC, heating, or managed-load operation.
Read article
Installation & Transfer Switches
Essential-Circuit Transfer Switch vs. Whole-House Transfer Switch
Decide which circuits receive backup and what can operate together; “whole-house transfer” alone does not promise unlimited generator power.
Read article
Standby Generator Basics
Generac Guardian vs. Next Generation Standby Generators
Compare a legacy Guardian proposal with a Next Generation system using exact model numbers, controllers, connectivity, and installed package details.
Read article
Generator Sizing & Load Planning
How Generator Load Management Works
Load management controls when selected appliances receive generator power. Understand shedding, restoration, exclusions, and the everyday tradeoffs.
Read article
Installation & Transfer Switches
How Long Does Standby Generator Installation Take?
Separate the days a crew is on site from the weeks needed for design, equipment, utilities, permits, inspections, and final testing.
Read article